UP mini 2 Extruder V2- 0.4mm Brass Nozzle 1.75mm Filament Direct Feed 8mm outside diameter
Features:
1. LED lighting wire on the Extruder for ease view of the print process
2. Brass Nozzle V5 with a narrower and finer point for higher print quality
2. Brass Nozzle V5 with a narrower and finer point for higher print quality
The UP mini 2 Extruder V2 is specially designed and provided for the UP mini 2. The extruder use 8mm brass nozzle and female screw type. Adjusting wind baffle on the extruder cover, you can adjust air flow to blow the PLA prints for better cooling or void of direct blow to ABS print in case of warping.
The UP mini 2 Extruder V2 uses a cooling fan with large power for better cooling.
NOTE:
To avoid snapping off the nozzle heater,
please remove or replace nozzle only after the nozzle is heated up to printing temperature.
| Nozzle heater version | Nozzle heater V5 | |
| Nozzle information | Nozzle version | Nozzle – 8mm V5 |
| Part number | 12012 | |
| Material | Copper | |
| Filament input diameter | 1.75mm | |
| Output diameter | 0.4mm | |
| Dimension | 9.22mm*8mm | |
| Screw type | Female | |
| Fan information | Fan power | 5V, 0.22A |
| Compatibility | UP mini 2 / UP mini 2 ES |
Jochen Schoberth (verified owner) –
A great Extruder for PLA and ABS