The printer does a good job and is easy to use but.. shortly after I started to use the printer it stopped communicating via the usb. I contacted Tiertime and received an acknowledgement but no assistance so I started to investigate. First I replaced the main board which I thought was the problem but this made no difference. I then replaced the CPU board but again this made no difference and I was very out of pocket. Having eliminated everything obvious, I investigated the microSD card which the printer uses to store data. I couldn’t read it in a card reader so I replaced it with a blank formatted card. This worked and the printer now connects. As I said, it’s a good printer but support is poor and mine had a very strange fault which cost me a lot of money to identify. I now have some expensive spares!
I first saw this printer with a friend. She came to work with me to brag. I also have 3 printer models, of which Prusa, Delta and one SLA type. Although I had printed many models at that time, I was very impressed by the prints made by my friend with a Cetus 3D printer model MKII. This made me buy a standard MKIII printer. I am very satisfied with the quality of the printer. I also decided to buy the update packages for it, namely the digital screen and the heated bed together with the automatic leveling sensor. I warmly recommend the purchase! I will come back with new comments after I upgrade my printer.
Andrew F. (verified owner) –
Loved the first two – so bought two more. Great support and a well run company!
Uploaded image(s):
Uploaded image(s):
Nigel Owen (verified owner) –
The printer does a good job and is easy to use but.. shortly after I started to use the printer it stopped communicating via the usb. I contacted Tiertime and received an acknowledgement but no assistance so I started to investigate. First I replaced the main board which I thought was the problem but this made no difference. I then replaced the CPU board but again this made no difference and I was very out of pocket. Having eliminated everything obvious, I investigated the microSD card which the printer uses to store data. I couldn’t read it in a card reader so I replaced it with a blank formatted card. This worked and the printer now connects. As I said, it’s a good printer but support is poor and mine had a very strange fault which cost me a lot of money to identify. I now have some expensive spares!
EUGENU DRAGOESCU (verified owner) –
I first saw this printer with a friend. She came to work with me to brag. I also have 3 printer models, of which Prusa, Delta and one SLA type. Although I had printed many models at that time, I was very impressed by the prints made by my friend with a Cetus 3D printer model MKII. This made me buy a standard MKIII printer. I am very satisfied with the quality of the printer. I also decided to buy the update packages for it, namely the digital screen and the heated bed together with the automatic leveling sensor. I warmly recommend the purchase! I will come back with new comments after I upgrade my printer.
Edward (verified owner) –
Very nice
Cédric Clivaz (verified owner) –
Assembly manual difficult to understand